manualshive.com logo in svg

Draper 60990, Инструкция по эксплуатации

Поделиться
Скачать
Draper 60990 Скачать руководство пользователя страница 1

CONTACTS

  -

  DRAPER TOOLS LIMITED, 

 

Hursley Road, Chandler's Ford,  

  

 

Eastleigh, Hampshire. SO53 1YF.  U.K.

  -

 Helpline: 

(023) 8049 4344 

  - 

Sales Desk: 

(023) 8049 4333

  - 

Internet: 

www.drapertools.com

  - 

E-mail: 

[email protected]

  - 

Sales Fax: 

(023) 8049 4209

  - 

General Enquiries: 

(023) 8026 6355

  - 

Service/Warranty Repair Agent

 

For aftersales servicing or warranty repairs, please  

 

 

contact the Draper Tools Helpline for details of an  

 

 

agent in your local area.

YOUR DRAPER STOCKIST

DKKC160115

INSTRUCTIONS FOR

750W 230V 1100mm

Digital Wood Lathe

 

Stock No.60990    Part No.WTL1100

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND 

EFFECTIVE USE OF THIS PRODUCT.

GENERAL INFORMATION

These instructions accompanying the product are the original instructions. This document is part of the product, keep it 
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before 
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and 
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions 
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools 
policy of continuous improvement determines the right to make modifications without prior warning.

Содержание 60990





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды