Haas TL Series, Руководство по обучению

Страница: 70 / 111

ES0609 rev D 4/09
8
RAPID FEED OD TURN FACE ID TURN PROFILE
Press <CYCLE START> to run
in MDI or <F4> to record
output to a program
TOOL NUMBER
1
WORK OFFSET
54
Z START PT
0.0000 in
OUTSIDE DIA.
0.0000 in
DIA. TO CUT
Z DIMENSION
DEPTH OF CUT
0.0000 in
FEED PER REV
0.0000 in
MAX RPM
1000
SFM
500
FILLET RADII
0.0000 in
TOOL NOSE
0.0000 in
0.0000 in
0.0000 in
GROOVING THREAD RE-CUT THREADING DRILL & TAP CHAMFER & RADIUS MANUALSETUP TURN & FACE
Tool Number – Enter the tool to be used.
Work Offset
– Enter the work offset to be used.
Z Start Pt – Enter the Z axis starting point.
Outside Dia. – Enter the current diameter of the work piece. Manually measure the diameter.
Dia. to Cut – Enter the finished diameter.
Z Dimension – Enter the Z axis dimension of the part from the Z start point.
Depth of Cut – Enter the depth of cut for each pass of the stock removal.
Feed Per Rev
– Enter the feed per revolution.
MAX RPM – Enter the maximum spindle turning speed.
SFM – Enter the Surface Feed per Minute.
Fillet Radii – Enter the corner fillet radii or enter ‘0’ for none.
Tool Nose – Enter the tool nose radius.
Turn & Face - ID Turn
This mode is for an inside diameter cut.
RAPID FEED OD TURN FACE ID TURN PROFILE
Press <CYCLE START> to run
in MDI or <F4> to record
output to a program
TOOL NUMBER
1
WORK OFFSET
54
Z START PT
0.0000 in
INSIDE DIA.
0.0000 in
DIA. TO CUT
Z DIMENSION
DEPTH OF CUT
0.0000 in
FEED PER REV
0.0000 in
MAX RPM
1000
SFM
200
FILLET RADII
0.0000 in
TOOL NOSE
0.0000 in
0.0000 in
0.0000 in
GROOVING THREAD RE-CUT THREADING DRILL & TAP CHAMFER & RADIUS MANUALSETUP TURN & FACE