Haas TL Series, Руководство по обучению

Страница: 69 / 111

ES0609 rev D 4/09
7
Z Position – Enter end point or move tool to end point desired. Press Z FACE MEAS to record this position.
Turn and Face - Feed
This mode provides for straight line (linear) motion from the machines current position to the specified ‘X’
and ‘Z’ end points.
NOTE: The Feed command is a single pass movement for features smaller than the maximum
cut depth for the tool. For larger features use the turn and face programs.
RAPID FEED OD TURN FACE ID TURN PROFILE
TOOL NUMBER
1
WORK OFFSET
54
DELTA X
0.0000 in
DELTA Z
0.0000 in
FEED PER REV
0.0000 in
SPINDLE RPM
0.0000 in
Press <CYCLE START> to run
in MDI or <F4> to record
output to a program
GROOVING THREAD RE-CUT THREADING DRILL & TAP CHAMFER & RADIUS MANUALSETUP TURN & FACE
Tool Number – Enter the tool to be used.
Work Offset – Enter the work offset to be used.
Delta X – Enter the X-coordinate of the end point of the linear motion desired.
Delta Z – Enter the Z-coordinate of the end point of the linear motion desired.
*Feed Per Rev. – Enter the feed per revolution (in inches or millimeters).
*Spindle RPM – Enter the spindle RPM.
*Mandatory Values
Advanced Users: In the full CNC mode this is a G01 command.
Turn & Face - OD Turn
This mode is for an outside diameter cut.