Haas TL Series, Руководство по обучению

Страница: 108 / 111

ES0666 rev D 09/09
6
t
ailStock
S
etup
Data values for tailstock parameters are stored in offsets in the Tailstock Setup screen.
NOTE: Tailstock tab is only visible when the machine has a tailstock.
1. Press MDI/DNC, then PRGRM CONVRS to enter IPS JOG mode.
2. Use the right/left arrow keys to select the SETUP tab and press Write/Enter. Use the right/left arrow keys to
select the TAILSTOCK tab and press Write/Enter to display the Tailstock Setup screen.
LIVE CTR ANG
60.000 deg
DIAMETER
LENGTH
2.0000 in
TS POSITION
TS OFFSET
RETRACT DIST
0.0000 in
X CLEARANCE
Z CLEARANCE
VQC SETUP
TS HOLD POINT
0.0000 in
STOCK TOOL WORK
ADVANCE DIST
0.0000 in
0.0000 in
1.2500 in
NOT MODIFIABLE
TS HOLD POINT is the sum of
TS POSITION and TS OFFSET and
is stored in setting 107.
TAILSTOCK
-10.0000 in
0.0000 in -0.5000 in
LIVE CTR ANG, DIAMETER and LENGTH match settings 220-222. X CLEARANCE matches setting 93. Z
CLEARANCE matches setting 94. RETRACT DIST matches setting 105. ADVANCE DIST matches setting
106. TS HOLD POINT is a combination of TS POSITION and TS OFFSET and matches setting 107.
Data is incremented by entering a value on the input line and pressing WRITE, or overridden by pressing F1.
When highlighting TS POSITION, pressing Z FACE MEAS takes the value of the B axis and places it in TS
POSITION. When highlighting X CLEARANCE, pressing X DIA MEAS takes the value of the X axis and
places it in X CLEARANCE. When highlighting Z CLEARANCE, pressing Z FACE MEAS takes the value of
the Z axis and places it in Z CLEARANCE.
Pressing ORIGIN when highlighting X CLEARANCE sets clearance to max travel. Pressing ORIGIN when
highlighting Z CLEARANCE sets clearance to zero.