Haas TL Series страница 64 Скачать руководство пользователя | Manualshive

Страница: 64 / 111

background image

ES0609 rev D 4/09

2

I

ntroductIon

These instructions are an in-depth look at each of the Intuitive Programming System (IPS) menus. A more

formal description is given for each of the entries to help better define the on-screen help for new users.
These instructions are to be used with the Lathe Operator’s Manual (96-8700) and Toolroom Lathe Operator’s

Addendum (96-0112)

The menus are navigated by using the left and right arrow keys. To select a menu item, press Write/Enter.

Some menus have sub-menus, in which case, use the left and right arrow keys and press Write/Enter to

select a sub-menu.

Use the arrow keys to navigate through the variables, enter values by using the number pad, and then press

Write/Enter.
To exit, or go back to another selection, press Cancel.
Pressing any of the buttons under the “Display” heading will exit the IPS menus, as will any of the mode keys

(i.e. Edit, Mem, MDI, etc.). To return to the IPS menu, press Handle Jog.

A representation of the machine keypad is included at the end of this document for reference.

This guide will help the user develop full CNC programs by means of the IPS screen. Note that a program

entered through the Toolroom Lathe screens is also accessible by going to full CNC MDI mode. The program

can be edited and saved from the full CNC mode.

NOTE:

The IPS menu is displayed at power up, and is available in the following

configurations:

• 10” LCD and software version 7.xx and earlier - IPS

• 15” LCD and software version 8.03 and earlier - IPS (upgradable to Profile Creator)

• 15” LCD and software version 8.04A and later - IPS with Profile Creator

M

anual

M

ode

Power on the machine and press RESET until all alarms have cleared. Press POWER ON/RESTART to zero

the machine. The IPS menu can now be accessed by pressing MDI DNC, then pressing PRGRM CONVRS.

Press WRITE/ENTER to display the IPS menu MANUAL tab.

GROOVING

THREAD RE-CUT

THREADING

DRILL & TAP

CHAMFER & RADIUS

TURN & FACE

CHAMFER

SETUP

MANUAL

X AND Z AXES

THE AXES CAN BE ELECTRONICALLY LOCKED AND UNLOCKED. THIS IS SHOWN BY

XZ-MAN DISPLAYED AT THE BOTTOM OF THE SCREEN. IN THIS MODE BOTH THE

X AND Z AXES ARE UNLOCKED AND CAN BE POSITIONED USING THE MANUAL

HAND WHEELS. PRESSING [SHIFT] AND EITHER [+X] OR [-X], [+Z], OR

[-Z] WILL ELECTRONICALLY LOCK THAT AXIS. PRESSING [SHIFT] AND THE

SAME BUTTON A SECOND TIME WILL UNLOCK THE AXIS.

SPINDLE

THE SPINDLE IS COMMANDED BY ENTERING A VALUE FOR THE SPINDLE SPEED

AND PRESSING EITHER THE [FWD] OR [REV] BUTTONS. THE SPINDLE SPEED

OVERRIDE KEYS (+/-10%) CAN BE USED TO ADJUST THE COMMANDED SPEED.

«
...
62
63
64
65
66
...
»

Содержание TL Series
















































































































Отзывы:

Нет отзывов

Похожие инструкции для TL Series

Бренд: Climax Страницы: 98

Бренд: The Cool Tool Страницы: 16

Бренд: Powermatic Страницы: 40

Бренд: Powermatic Страницы: 44

Бренд: Powermatic Страницы: 52

Бренд: Grizzly Страницы: 47

Бренд: Grizzly Страницы: 56

Бренд: Grizzly Страницы: 64

Бренд: Grizzly Страницы: 112

Бренд: Jet Страницы: 48

Бренд: JD Squared Страницы: 20

Бренд: King Canada Страницы: 4

Бренд: Craftsman Страницы: 6

Бренд: Craftsman Страницы: 20

Бренд: MICRO-MARK Страницы: 9

Бренд: MICRO-MARK Страницы: 31

Бренд: Automate Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды