Installation Manual
H3C VG 21-08 Voice Gateway
Chapter 5 Software Maintenance
5-13
interface), and configure the HyperTerminal with reference to
section4.1.1 II. Setting terminal parameters.
Step 3: Install the TFTP Server on the PC.
Note:
The VG 21-08 does not provide the TFTP Server program, and you
should purchase and install it by yourself.
Step 4: Copy the new application file to a directory, “C:\H3C” for
example.
Step 5: Configure the IP address for the FE interface on the PC,
10.110.10.10 for example.
II. Running TFTP Server
Step 1: Run the TFTP Server on the PC.
Step 2: Specify a directory for the new application program.
III. Configuring the VG 21-08
Step 1: Boot the VG 21-08 and press <N> upon appearance of
the message “Voice Gateway starts booting ... ”. The system displays
the following message:
(M)odify any of Voice Gateway configuration or (C)ontinue?
[M]
Press <Enter>. The following message appears:
For each of the following questions, you can press <Return>
