Installation Manual
H3C VG 21-08 Voice Gateway
Chapter 3 Installing the VG 21-08
3-5
Note:
When preparing network cables, use shielded cables preferentially for
the sake of electromagnetic compatibility.
II. Connecting the Ethernet cable
Caution:
Read the mark above the interface carefully to avoid misconnection.
Follow these steps to connect the Ethernet cable:
Step 1: Insert one end of the Ethernet cable to the Ethernet port
of the VG 21-08 and connect the other end to a hub, an Ethernet
switch, or a router.
Step 2: Check that the LINK LED on the front panel is ON. ON
means the network cable is correctly connected.
3.6 Connecting the Telephone Cable
The cables used for connecting FXO ports are telephone cables
with ferrite bead and RJ-11 connectors at both ends. You can connect
the VG 21-08 to a program-controlled telephone switching system
simply through the telephone cable.
