background image

Convention 

Description 

[ x | y | ... ]

 

Square brackets enclose a set of optional syntax choices separated by vertical 
bars, from which you select one or none.  

{ x | y | ... } *

 

Asterisk marked braces enclose a set of required syntax choices separated by 
vertical bars, from which you select at least one. 

[ x | y | ... ] *

 

Asterisk marked square brackets enclose optional syntax choices separated by 
vertical bars, from which you may select multiple choices or none.  

&<1-n> 

The argument or keyword and argument combination before the ampersand (&) 
sign can be entered 1 to n times. 

A line that starts with a pound (#) sign is comments. 

 

GUI conventions 

Convention 

Description 

Boldface

 

Window names, button names, field names, and menu items are in Boldface. 
For example, the 

New User

 window appears; click 

OK

Multi-level menus are separated by angle brackets. For example, 

File

 > 

Create

 

Folder

 

Symbols 

Convention 

Description 

 

Means reader be extremely careful. Improper operation may cause bodily 
injury.  

 

Means reader be careful. Improper operation may cause data loss or damage to 
equipment.  

 

Means a complementary description.  

 

About the H3C S5500-SI Documentation Set 

The H3C S5500-SI documentation set also includes:  

Category 

Documents 

Purposes 

Marketing brochures

 

Describe product specifications and benefits.  

Technology white papers

 

Provide an in-depth description of software features 
and technologies.  

RPS User Manual

 

Describes the appearances, features, and 
specifications of the RPS units available for the 
products.  

RPS Ordering Information for 
H3C Low-End Ethernet Switches

Provides the RPS and switch compatibility matrix and 
RPS cable specifications.  

H3C Low End Series Ethernet 
Switches Pluggable Modules 
Manual

 

Describes the models, appearances, and 
specifications of the pluggable modules available for 
the products.  

Product 
description and 
specifications 

Interface Card User Manual

 

Describes the appearance and specifications of the 
interface card.  

Содержание S5500-SI Series



































































































































Отзывы: