H3C Neocean IX1000, Руководство по установке

Страница: 56 / 64

Installation Manual
Neocean IX1000 Network Storage System
Chapter 5 Troubleshooting an IX1000
5-4
Caution:
Insert the power module steadily. Pay attention to the insertion direction of the power
module to avoid inserting it incorrectly. To avoid damaging or bending the power
terminals, if the power is not well aligned, pull the power module back and insert it
again.
Figure 5-2
Installing a power module
5.3 Troubleshooting Disks
5.3.1 Fault Diagnosis
You can judge whether a disk is faulty by the status of the disk fault/array state LED
(see
Table 5-2 ) or the information displayed on the configuration interface of the RAID
controller (see Figure 4-11 ).
Table 5-2
Description of the disk fault/array state LED
Status Meaning
OFF The disk is normal.
FLASH (yellow)
The disk array where the disk is located is synchronizing
data or is being re-established.
ON (yellow) The disk is faulty.