GRAPH
MODE
85
Backspace
All clear
Clear
Increase
Decrease
If a wrong unit is entered, the value is cancelled.
Unit Mismatched
If the entered Hi level is lower than the Lo level,
the two values are swapped.
Hi and Lo Swapped
Set Lo level
6.
Press the Up/Down key to move the
cursor to Lo percentage and repeat
the same step.
Cs Lo:
-19.500%
Range
–1.0x10
12
(Tera) ~ 1.0x10
12
(Tera) %
Set Nominal
7.
Press the Up/Down key to move the
cursor to Nominal.
Nominal:
1.0000mF
8.
Use the numerical keys to enter the nominal
value on which the Hi and Lo percentages are
based.
Range
According to each measurement item
(see page31).
1.2m
Ω
m
Ω
Enter
1.5kH
Enter
H
k
Backspace
All clear
Clear
LCR-8101
User
Manual
86
Increase
Decrease
If a wrong unit is entered, the value is cancelled.
Unit Mismatched
If a value outside of the range is entered, the
closest available value is automatically selected.
Nearest Available
Set vertical axis (Auto + Absolute)
Background
The Y (vertical) axis configuration is available for:
•
Manual or Automatic fit: Selects whether the
vertical range is manually set or automatically
adjusted as the graph is plotted.
•
Absolute or Percentage: Selects how the vertical
range is defined, as absolute values (minimum
and maximum) or percentage of the nominal
(center) value.
Panel operation
1.
Press F2 to select Abs (Absolute).
Abs
%
F 2
2.
Press F3 to select Auto Fit.
Auto Fit
F 3
3.
Nothing new appears on the display: LCR-8101
automatically configures the vertical scale
according to the measured data.
Step Size:
2 4 8
1