GW Instek LCR-8101, Руководство пользователя, Страница: 26 / 59

BASIC MEASUREMENT
51
Fast
150mS (AC), 60mS (Rdc)
Max
75mS (AC), 30mS (Rdc)
Beep setting
If the beep setting (page54) is active
and the display is in Pass/Fail test
mode, it might sound continuously
depending on the measurement result.
If this happens, press the Sing/Rep key
and set the mode to Single. Then turn
Off the buzzer.
Sing/Rep
Hide drive Voltage/Current
Background
The drive voltage and current shows
the actual voltage/current level
applied to the device under test.
Vm:549.8mV
Im:724.9pA
Panel operation
1. Press the Code key.
Code
2. Enter the system code using the numerical
keys, then press the Enter key.
Hide drive V/I: 80
Enter
Vm:549.8mV
Im:724.9pA
Show drive V/I: 81
Enter
Vm:549.8mV
Im:724.9pA
LCR-8101 User Manual
52
P
ASS-FAIL MODE
In the Pass/Fail test mode, measurement results are
compared with user-defined limits and the results
are displayed. Two types of tests are available: Single
and Multi-Step. The Single test shares the same
interface with the basic measurement, and tracks one
item. The Multi-Step test runs a program comprised
of multiple measurement items with different
parameters.
Single-step
configuration Overview............................................................ 53
Configure beep setting ....................................... 54
Select test item and scale (Pass/Fail test) .......... 55
Set parameters................................................... 56
Single-step run Run in Absolute mode ........................................ 58
Run in Percentage mode .................................... 59
Use display value as nominal ............................. 60
Multi-step
configuration Overview............................................................ 61
Configure beep setting ....................................... 62
Enter multi-step mode ....................................... 63
Create new program ........................................... 63
Edit program step .............................................. 65
Copy (duplicate) program step ........................... 68
Delete program step .......................................... 68
Multi-step run Run program ...................................................... 69
Multi-step file
operation Save program..................................................... 71
Recall (load) existing program ........................... 73
Delete existing program ..................................... 74