manualshive.com logo in svg

GS Chromalox 4081, Руководство по установке и эксплуатации

Поделиться
Скачать
GS Chromalox 4081 Скачать руководство пользователя страница 58

50

Profiler Setup Menu

Screens marked 

 will not time-out automatically. They 

must be completed for a valid profile to be created. 

Refer to the Profiler section on page 87 for more details 

about the profiler.

Entry into the Profiler Setup Menu

The Profiler Setup Menu is entered from the Main Menu
Hold down 

 and press 

 to enter the Main Menu.

Press 

 or 

 to select the Profiler Setup Menu

Note: Entry into this mode is security-protected 

by the profiler setup menu lock code. Refer to the 

Lock Code Configuration sub-menu.

Press 

 to enter the Profiler Setup Menu.

Navigating the Profiler Setup Menu

Press 

 to move forward, or 

 to move backwards 

through parameters & screens.

Press 

 or 

 to select or change the value as re-

quired.

Holding down 

 or 

 for more than 1 second skips 

immediately to the next/previous screen accepting 

ALL values as shown.

Hold down 

 and press 

 to return to the Main Menu

Scrolling “Help Text” is shown at the bottom of the 

screens to aid navigation.

  PROFILER SETUP MENU SCREENS

Profiler Setup Menu 

Unlocking

Enter correct code number to access Profiler Setup Menu. Factory Default 

value is 10.

Profile Setup Options

Select the required profile setup sub-menu option from: General Configura-

tion; Create a Profile; Edit a Profile Header; Edit a Profile Segment; Insert a 

Segment; Delete a Segment; Delete a Profile or Delete ALL Profiles.

General Profile 

Configuration

Sub-menu with global settings affecting all profiles. Press Press 

 & 

 to 

return to Profile Setup Menu

General

Enable Edit While 

Running

Enables or disables the ability to edit profiles whist a profile is running.

Caution:

 Edits made to the current or next segment of the running 

profile will take effect until after the profile is restarted.

Timer Start 

Function

Enable or disable automatic starting of profiles. When enabled, delayed starts 

are possible, or if the selected profile has a day & time trigger it waits until the 

time set before starting.

Note: If the Timer Start Function is disabled, profiles can only be manually 

started, and with immediate effect even if they have a delay or day & time 

trigger defined.

Create A Profile

Sub-menu to create a new profile. A header is created first, followed by the 

segments – see below.

Caution:

 It is not possible to exit from this sub-menu until profile 

creation is fully complete. Do not turn off the power during pro-

file creation or editing. When the profile creation/editing is com-

plete the instrument returns automatically to the profile setup main 

menu.

Note: A warning is displayed if the maximum number of 64 profiles or 255 

segments is exceeded.

Содержание Chromalox 4081













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды