Grizzly G1023RL Скачать руководство пользователя страница 92

Страница: 92 / 96

-90-

Model G1023RL Series (Mfd. Since 12/11)

Machine Labels

Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine

MUST maintain the original location and readability of the labels on the machine. If any label is

removed or becomes unreadable, REPLACE that label before using the machine again. Contact

Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.

WARNING!

DISCONNECT
POWER
BEFORE
CHANGING
BLADES!

WARNING!

ALWAYS USE
GUARDS AND
ANTI-KICKBACK
DEVICES!

WARNING!

SAFETY

GLASSES AND

RESPIRATOR

REQUIRED!

FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are

copyrighted and must only be used on Grizzly brand machines. Never use Grizzly’s label

artwork on other brands of machines.

DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.

G1023RL Labels B

Specifications

Motor: 3 HP, 240V, 1-PH,

Arbor Speed: 4200 RPM
Max. Blade Size: 10"
Max. Width Of Cut: 25-5/8"
Max. Depth Of Cut 90˚: 3"
Max. Depth Of Cut 45˚: 2-1/8"
Max. Dado Width: 13/16"
Arbor Size: 5/8"
Table Size: 40" X 27"
Table Height: 34"
Weight: 410 Lbs.

Date

Serial Number

Manufactured for Grizzly in Taiwan

WARNING!

177335

To reduce risk of serious injury when using this machine:

1. Read and understand owner’s manual before operating.

2. Never touch a moving blade and keep hands out of blade path.
3. Always wear ANSI approved eye protection and a respirator.

4. Always use blade guard/spreader for all through cuts; and use

riving knife for all non-through cuts.

  5.  Only use blades meeting size/speed requirements for this saw.
  6.  Make sure spreader/riving knife is properly installed/adjusted.
  7.  Never reach behind or over blade while it is moving.

8. Use a push stick when required, and whenever possible.
9. Understand “kickback”, what causes it, and how to prevent it.

10. Never remove jammed/cutoff workpiece when blade is moving!
11. Make sure blade is stopped before adjusting height/tilt.

12.  Do not perform any operation freehand.
13.  Ensure machine is stable and fence is parallel with blade.
14.  Disconnect power before changing blades or servicing saw.

15. Plan cuts so that workpieces always remain supported.
16. Do not wear loose clothing, gloves, jewelry, or other items that

can get entangled. Tie back long hair and roll up sleeves.

17. Operate in a dry environment that is free of rain or dampness.

18. Do not allow untrained people to access this saw. If access

cannot be restricted, lock-out or disable saw from operation.

MODEL G1023RL

10" LEFT-TILT TABLE SAW

WITH RIVING KNIFE

WARNING!

G1023RL Labels A

WARNING!

SAFETY

GLASSES AND

RESPIRATOR

REQUIRED!

G10

FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are

copyrighted and must only be used on Grizzly brand machines. Never use Grizzly’s label

artwork on other brands of machines.

DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.

G1023RL Labels B

The Model G1023RL series
spreader/riving knife is
0.1" thick. Follow these
requirements to ensure the
spreader/riving knife works
safely:

BLADE REQUIREMENTS
Standard Blades
• Diameter: 10"
• Max. Body Thickness: 0.094"
• Min. Kerf Thickness: 0.122"
• Must be aligned with
spreader or riving knife.

Dado Blades
• Riving knife or spreader not
compatible with dado blades
smaller than 10" in diameter

• Max Width 13/16"

WARNING!

SAFETY

GLASSES AND

RESPIRATOR

REQUIRED!

G10

FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are

copyrighted and must only be used on Grizzly brand machines. Never use Grizzly’s label

artwork on other brands of machines.

DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.