Grizzly G1023RL, Руководство пользователя

Страница: 74 / 96

-72-
Model G1023RL Series (Mfd. Since 12/11)
Replacing Belt
1. DISCONNECT SAW FROM POWER!
2. Remove the table insert.
3. Remove the ON/OFF switch from the table.
4. Remove the four table mounting bolts.
5. With the help of an another person, lift the
table off of the cabinet and set it aside.
6. Note the location and quantity of any shims
on the cabinet top, then set them aside.
7. Remove the cap screws that secure the dust
collection chute, shown in Figure 127, then
remove the chute.
8. Remove the cap screws that secure the
mounting plate shown in
Figure 128, then
remove the plate.
9. Loosen the motor adjustment bolt (see Figure
125 on Page 71).
10. Remove the three Phillips head screws on
the bearing retainer, shown in
Figure 129,
then remove the retainer.
11. Place the open end of the arbor wrench on
the arbor, and while keeping the arbor sta-
tionary, use a 25mm wrench to loosen and
remove the lock nut at the other end of the
arbor, as shown in
Figure 130.
Figure 129. Removing bearing shield.
Figure 130. Removing arbor lock nut. (Inset:
arbor lock nut.)
Figure 127. Dust chute mounting screws.
Cap
Screws
Dust
Collection
Chute
Figure 128. Removing mounting plate.
Mounting
Plate
Cap Screws
Bearing
Retainer
Phillips
Head
Screw