Grizzly G1023RL, Руководство пользователя

Страница: 69 / 96

Model G1023RL Series (Mfd. Since 12/11)
-67-
4. Loosen the rail mounting bolts and adjust the
rails as needed until the fence rides smooth-
ly, the gap is approximately
1
⁄
16
", and is even
from front to back (see FIgure 114).
Front Pads
Rear Pads
Figure 115. Fence pad locations.
Clamping Pressure and Parallelism
The fence clamping mechanism adjusts the
clamping pressure to hold your fence securely
and to position the fence parallel with the blade.
Note: It is permissible for the back of the
fence to pivot outward
1 ⁄
64
" from being paral-
lel with the blade (see
Figure 119 on Page
68). Many woodworkers intentionally set up
their fence in this manner. This creates a
slightly larger opening between the fence
and the rear of the blade to reduce the risk
of workpiece binding or burning as it is fed
through the cut. Keep this in mind before
adjusting your fence.
— If the fence/miter slot are parallel with the
blade, as shown in Figure 116, no futher
adjustments need to be made.
— If the fence is not parallel with the blade/
miter slot, then you must adjust the fence
parallel with the blade.
—If the miter slot is not parallel with the blade,
you must follow the procedures described
in
Miter Slot to Blade Parallelism on
Page 61.
2. Slide the fence up against the right hand edge
of the miter slot, lock it in place, then raise the
blade to its maximum height. Examine how
the fence lines up with the miter slot and the
blade, as shown in
Figure 116.
Figure 116. Checking fence parallelism with
blade.
Fence is
Parallel to
Miter Slot,
which is
Parallel to
Blade
Miter Slot
Blade
Fence
To verify fence parallelism:
1. Slide the fence along the rail.
—If the fence drags across the table, then
loosen the rail mounting bolts and adjust
the rails just enough so the gap between
the fence and the table is even from front
to back (see
Figure 114 on Page 66).
Tighten the rail mounting bolts.
3. Check the fence support pads. Over time
the pads illustrated in Figure 115 will wear.
Replace them if they appear worn.