GREAT PLAINS YP2425 Скачать руководство пользователя страница 9

Страница: 9 / 166

YP2425 and YP2425F

Table of Contents

Index

Important Safety Information

2016-11-16

Table of Contents

Index

401-406M

Safety At All Times

Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.



Be familiar with all planter functions.



Operate machinery from the driver’s seat only.



Do not leave planter unattended with tractor engine
running.



Do not dismount a moving tractor. Dismounting a moving
tractor could cause serious injury or death.



Do not stand between the tractor and planter during
hitching.



Keep hands, feet and clothing away from power-driven
parts.



Wear snug-fitting clothing to avoid entanglement with
moving parts.



Watch out for wires, trees, etc., when folding and raising
planter. Make sure all persons are clear of working area.

Содержание YP2425







































































































































































Результаты поиска

Содержание YP2425

Отзывы:

Бренды по названию

Популярные бренды

GREAT PLAINS YP2425, Руководство оператора

Результаты поиска

Содержание YP2425

Отзывы:

Бренды по названию

Популярные бренды