GRASS VALLEY K2 BASECAMP EXPRESS, Инструкция по установке и обслуживанию

Страница: 319 / 366

Managing the Restripe Utility
If you answer “Yes” to the dialog box that asks about restriping existing media, after the bandwidth
expansion process completes, Storage Utility exits with a special code. On receiving the special exit
code, the K2 System Configuration application sets the current date in the registry of the K2 Media
Server that takes the role of FTP server.
When the FTP server restarts, the Restripe Utility automatically opens. The Restripe Utility reads
the date set in the registry, finds clips and files created before that date, and restripes the clips and
files, one at a time.
1. You can monitor the Restripe Utility in the following ways:
• While the Restripe Utility is running, it is represented by an icon in the system tray. You can
right-click this icon and open the Restripe Utility window.
• IMAGE HERE
• The Restripe Utility window reports first on the progress of K2 clips being restriped, then on
the progress of files being restriped.
• Click the Report button for a list of clips and files that failed to be restriped, if any.
• When the Restripe Utility completes its processes, it reports its results to
C:\profile\RestripeResult.txt. Open this file in Notepad to verify successful results.
2. You can start and stop the Restripe Utility manually as follows:
• At any time while the Restripe Utility is in the process of restriping clips, you can right-click
the icon in the system tray, and select
Abort
. This stops the restripe process and closes the
Restripe Utility.
NOTE: Stopping the Restripe Utility before it completes its processes leaves some of your
existing media still striped across the original narrower stripe group. Once the Restripe
Utility is stopped, you cannot restripe that existing media.
Recovering the media database
Use the topics in this section to understand and implement recovery strategies for your K2 storage
media database.
About the automatic database backup process
Every 15 minutes the K2 system checks to see if any media operations have changed the media
database. If a change has occurred, the K2 system creates a backup file of the media database. The
backup file is saved in the same directory as the media database using a rotating set of three file
names. These files are named
media.db_bakX
where
X
is the number in the rotation. Each time a
backup occurs, the oldest backup file is overwritten. If some condition renders one of the backup
files un-writable, the backup file following that in the rotation is subsequently used for every backup
until the condition is resolved.
02 February 2012 K2 SAN Installation and Service Manual 319
Administering and maintaining the K2 SAN