GRASS VALLEY K2 BASECAMP EXPRESS, Инструкция по установке и обслуживанию

Страница: 240 / 366

If a custom K2 SAN, qualified system designers can view subnets to help assign iSCSI targets.
1. Click
Modify
.
The Bandwidth Input dialog box opens.
2. Enter the channel count, bit rate, and track count per channel information according to your
intended use of the K2 client.
If using ChannelFlex Suite with multiple inputs and/or outputs per channel, do not enter the
number of channels. Instead do the following:
• For
Number of encoder channels
enter the total number of inputs.
• For
Number of recorder channels
enter the total number of outputs.
3. Click
Calculate
.
4. Click
Assign Portal
, then
OK
to confirm.
If you have a redundant K2 SAN, the K2Config application makes the appropriate assignment
to the redundant server, as reported in the Secondary target box.
5. Click
Next
.
The Completing the Configuration Wizard page opens.
6. Click
Finish
.
The wizard closes. The SAN client restarts.
Repeat these tasks to add remaining SAN clients to the K2 SAN.
240 K2 SAN Installation and Service Manual 02 February 2012
Configuring clients on the K2 SAN