GRASS VALLEY K2 BASECAMP EXPRESS, Инструкция по установке и обслуживанию

Страница: 115 / 366

5. In the right-hand pane, select the devices that you are combining as a deployment group.
To select multiple devices, you can drag through the devices, use Ctrl + Click, or use Shift +
Click.
6. Click
OK
.
The devices appear in the Deployment Groups tree view under the deployment group. Before you
perform a software deployment, you must check software on the devices that will be receiving new
software. If you have already added packages to the group, on the Deployment Groups tab you will
also see deployment tasks generated for every device with roles that match the package contents.
Adding a software package to a deployment group
1. In the
Software Deployment | Deployment Groups
tree view, select a deployment group.
2. Click the
Add
button.
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
• Select from the list of packages then click
OK
.
• Click
Browse
, browse to and select the package, then click
Open
.
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept a EULA, the
associated software is not assigned to the deployment group.
SiteConfig adds the package to the deployment group.
The package appears in the Managed Packages list for the selected deployment group. SiteConfig
creates new software deployment tasks for the package and displays them in the Tasks list view.
Checking all currently installed software on devices
Prerequisites for this task are as follows:
• The device is assigned in the SiteConfig system description and network connectivity is present.
• SiteConfig is able to log in to the device using the username/password credentials assigned to
the device.
• The SiteConfig PC does not have a network drive mapped to an administrative share (such as
C$) on a device on which you are checking software.
• If the SiteConfig Network Configuration Kit and/or Discovery Agent at version lower than
1.1.0.185 is currently installed, it must be manually uninstalled and updated. For more information
refer to SiteConfig Migration Instructions.
1. In the
Software Deployment | Deployment Groups
tree view, right-click the top-most node for the
group or any individual device and select
Check Software
.
NOTE: If you have access problems, verify that the adminstrator account on the device has
credentials as currently configured in SiteConfig.
The Check Software dialog box appears. SiteConfig searches for software on the selected device
or devices and gathers information. Progress is reported.
2. When the check is complete, close the Check Software dialog box.
02 February 2012 K2 SAN Installation and Service Manual 115
Managing K2 Software