GRASS VALLEY K2 BASECAMP EXPRESS, Инструкция по установке и обслуживанию

Страница: 123 / 366

Setting up Windows
If a system is restored using the factory-default generic disk image or otherwise has the Windows
operating system re-applied, a Windows set up process is required.
1. Upon first startup after reimage, a Windows Setup Wizard automatically opens. Work through
the wizard as follows:
a) Enter in the Windows Product Key and click
Next
.
The Product Key is on a sticker on the top of the machine near the front right corner.
b) Enter the name of the machine.
To restore the factory-default name, enter the Serial Number (located at the right side and
rear). The password is pre-set to the factory default. Leave the password as is.
c) Click
Next
.
d) Set Time and click
Next
.
Windows loads components and restarts the K2 Media Server.
2. Upon restart, log in to Windows.
3. Rename the machine and set Windows clock as necessary.
Activating the Windows operating system
If a system is restored to its factory default state or otherwise has the Windows operating system
re-applied, you might need to activate the operating system. This procedure provides instructions
for doing this while the machine is connected to the Internet. The Activation wizard provides other
options, which you can also choose if desired.
To active the Windows operating system, do the following:
1. Make sure the machine is connected to the Internet.
2. From the Windows desktop, in the system tray double-click on the key symbol icon. The Activate
window opens.
3. Select
Yes, let's activate Windows over the Internet now
and click
Next
.
4. When prompted, “If you want to register with Microsoft right now.”, select
No
.
5. Wait for the connection. If the system times out, you are prompted for entering information in
the Internet Protocol Connection dialog. Enter the proxy address and port number as appropriate
for your facility’s connections.
6. Ensure that “You have successfully activated your copy of Windows” message appears in Activate
Windows.
7. Click
OK
to close the Activate Windows.
02 February 2012 K2 SAN Installation and Service Manual 123
Managing K2 Software