Sources/Recording
Switching an external SDI router while recording, may cause
video and audio to be asynchronous.
Description:
CR29334
Don
’
t switch external SDI signals while recording.
Workaround:
Records may become corrupt when disk space on the SAN
reaches very low levels.
Description:
CR38987
Don
’
t allow the SAN to exceed 90% capacity during normal
operation.
Workaround:
NOTE: When con
fi
guring a VTR as both the input source and play to tape location, it is
imperative that a feedback loop not be created as doing so may disrupt standard Aurora Edit
behavior.
Capture of audio has a weird audio echo happening after
switching sources.
Description:
CR84145
Toggle between the source giving you this issue and another
source and back again. You should no longer hear the audio
echo.
Workaround:
Summit
Creating a long bin name over 32 characters causes smartbins
to fail to transfer clips to Edit.
Description:
CR101388
Rename the bin to be 32 characters or less.
Workaround:
When winking over QT
fi
les from Summit, opening them in
the vmf on FCP causes them to fail to open.
Description:
CR109626
You cannot use this with growing
fi
les from Summit. If you
want to use it with growing
fi
les then you need to navigate to
the V:/Media path on the Summit server side.
Workaround:
TGA sequences
Playing back HD TGA sequences may result in choppy
playback.
Description:
CR106521
Render the TGA sequence.
Workaround:
Media conversion of TGA sequences is not supported.
Description:
CR66521
It is recommended that TGA sequences get imported into
Aurora Edit in the format that they were created for.
Workaround:
Transfers
Transferring a clip that has an apostrophe in the name will
result in a
“
Server Busy
”
error when sending to a SAN.
Description:
CR51595
88
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
18 October 2010
Known Issues
