Play to tape
The
fi
rst frame is doubled when playing to tape.
Description:
CR85414
None at this time.
Workaround:
Preserve ANC Data
ANC data track will only be preserved and supported for AAF
and GXF media exports. F2 wink (Transfer) and gxf transfers
from Edit work
fl
ows are also supported.
Description:
CR108780
None
Workaround:
As described in the Preserve ANC Data section of the Aurora
Edit User Guide, Interlaced to progressive conversions, and
vice-versa, does not support converting the anc data properly.
Description:
CR108130
This ancillary data conversion is not currently supported.
Workaround:
Recording to Timeline
Intermittent
fl
ash frame with record to timeline
(SDR/HDR/SDFX/HDFX). Set up an in point on a tape that
Description:
CR81820
is the
fi
rst frame after a scene change. Go to the timeline and
set an in point in the middle of a clip or in
fi
ller. Record to
timeline. Notice that you see a
fl
ash frame of the scene before
the in point on the tape.
None
Workaround:
Timeline pointer skips ahead a couple of frames when reaching
the IN mark of a record to timeline (SDFX/HDFX)
Description:
CR80923
None
Workaround:
When you are recording to a Timeline while you also have a
Record to Bin window open, you may get a Src Filter error.
Description:
CR92196
This may indicate insuf
fi
cient bandwidth on shared storage
or poor disk performance on local storage.
Close the Record to Bin window before recording to the
Timeline.
Workaround:
If you click on the Storyboard while recording to the Timeline,
recording stops.
Description:
CR95207
Restart your recording.
Workaround:
Record to Timeline is dropping frames.
Description:
CR110225
Recording to an HD Timeline over 2 video tracks and a video
effect may fail due to dropped frames. This is a known
Workaround:
limitation. Work around: record to bin and then drop the clip
onto the Timeline, or render the effect before recording to
Timeline.
84
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
18 October 2010
Known Issues
