Action
Managed Package
Deploy
Install
SNFS nonK2 x64 (version must be
compatible with K2 SAN)
NOTE: If there are dependencies, SiteCon
fi
g can enforce that some tasks be
deployed together.
7. Check the area next to the Start Deployment button for a message.
If a message instructs you to upgrade the Discovery Agent, on the control point
PC go to the directory to which SiteCon
fi
g is installed,
fi
nd the
DiscoveryAgent_x.x.x.x.cab
fi
le, add it to the deployment group, and deploy
the Discovery Agent software as well.
8. Click the
Start Deployment
button.
Deployment tasks run and software is installed. Progress is reported and next
steps are indicated in both the Status and Details columns.
9. When the Status or Details columns indicate next steps, identify the software in
the row, then do one of the following:
•
When Details displays a
Restart required
link, click the link and when prompted
"...are you sure...", click
Yes
.
The device restarts.
10. The shared media drives on the Aurora Edit workstations should have been mapped
in the previous software installation.
The install program checks for mapped drive status, so if the shared media drives
are not mapped, you will be noti
fi
ed by the application to do this.
11. For the software you are installing, select the
Deploy
check box in the row for the
install task.
Install Aurora Suite software as follows:
Action
Managed Package
Deploy
Install
AuroraSuite 7.1.0.xxxx
12. Click the
Start Deployment
button.
Deployment tasks run and software is uninstalled. Progress is reported and next
steps are indicated in both the Status and Details columns. If an error appears
regarding prerequisite software, install the prerequisite
fi
les on the control point
PC and then repeat this step.
38
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
18 October 2010
Upgrading Aurora Edit and Aurora Edit LD systems
