•
Shut down all applications on the devices you are upgrading.
Upgrading Aurora Edit and Edit LD devices with SiteConfig
This section contains the tasks for using SiteCon
fi
g to upgrade Aurora Edit and Aurora
Edit LD devices to this release of software. Work through the tasks sequentially to
complete the upgrade.
NOTE: These upgrade instructions assume that current software is at version 6.5
or higher. If you have a lower version of software, contact Grass Valley Support
before upgrading.
NOTE: When upgrading from a version lower than 6.5, the software installs with
a 30 day trial license. You need a permanent license to operate beyond the trial
period.
CAUTION: If you upgrade and then decide you do not want to stay with this
version of software, you must use the recovery disk image process to downgrade
to your previous version.
Prepare SiteConfig for software deployment
Do the following to prepare SiteCon
fi
g for the software upgrade.
1. Make the following
fi
les accessible to the SiteCon
fi
g control point PC:
•
AuroraSuite software installation (
*.cab
)
fi
le
•
AuroraEditLD software installation (
*.cab
)
fi
le
•
NewsShare software installation (
*.cab
)
fi
le
•
ConformServer software installation (
*.cab
)
fi
le
•
SNFS software installation
*.cab
fi
le
(SNFS_nonK2_x86<versionnumber>.cab for the 32-bit and
SNFS_nonK2_x64<versionnumber>.cab for the 64-bit.)
•
Generic iSCSI software installation (
*.cab
)
fi
les
(GenericiSCSI_x86<versionnumber>.cab for the 32-bit and
GenericiSCSI_x64<versionnumber>.cab for the 64-bit.)
•
GVGMLib software installation (
*.cab
)
fi
le
•
PCmonitoring software installation (
*.cab
)
fi
le
2. If a newer version of SiteCon
fi
g is available for upgrade and you have not yet
upgraded SiteCon
fi
g, do the following:
a) From Windows Add/Remove programs, uninstall the current version of
SiteCon
fi
g from the control point PC.
b) Install the new version of SiteCon
fi
g on the control point PC.
18 October 2010
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
25
Upgrading Aurora Edit and Aurora Edit LD systems