DiscoveryAgent_x.x.x.x.cab
fi
le, add it to the deployment group, and deploy
the Discovery Agent software as well.
4. Click the
Start Deployment
button.
Deployment tasks run and software is uninstalled. Progress is reported and next
steps are indicated in both the Status and Details columns. If an error appears
regarding prerequisite software, install the prerequisite
fi
les on the control point
PC and then repeat this step.
5. When the Status or Details columns indicate next steps, identify the software in
the row, then do one of the following:
•
When Details displays a
Restart required
link, click the link and when prompted
"...are you sure...", click
Yes
.
The device restarts.
6. For the software you are installing, select the
Deploy
check box in the row for the
install task.
Install software as follows:
Action
Managed Package
Deploy
Install
GenericISCI x86 xxxx.xxxx
(version must be compatible with
K2 SAN)
Install
GenericISCI x64 xxxx.xxxx
(version must be compatible with
K2 SAN)
Install
GVGMLib xxxx.xxxx (version
must be compatible with K2 SAN)
Also, you must upgrade SNFS with this release, so deploy the following tasks
at the same time:
Action
Managed Package
Deploy
Install
SNFS nonK2 x86 (version must be
compatible with K2 SAN)
18 October 2010
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
37
Upgrading Aurora Edit and Aurora Edit LD systems
