If the Stereo Mix source is not shown, go to
Options | Properties
, click to select the
Stereo Mix source and click
OK
.
5. Exit the window.
6. Click
OK
to exit Sounds and Audio Devices.
Networking
•
When using a Gigabit Ethernet card with an HP system, you must install this card
into a PCI Express or PCI-X slot to avoid con
fl
ict with the 1394 controller on the
motherboard.
•
Windows XP Service Pack 3 automatically con
fi
gures a Windows Firewall for the
client. For clients attached to networks with an existing Firewall, it is recommended
that you disabled this Windows Firewall. For those without an external Firewall,
individual ports may need to have restrictions lifted as Windows will block the
unknown connection. To unblock a port, go to
Start | Settings | Control Panel |
Security Center | Windows Firewall | Exceptions
and add Aurora Edit to the
fi
rewall
exceptions.
Performance
•
The recommended Virtual Memory Allocation for all DNP systems is 2046 MB
(set at the Grass Valley factory).
•
To improve system performance, adjust this setting:
1. Right-click on My Computer and select
Properties
.
2. Click the Advanced tab.
3. In the Performance area, click
Settings
.
4. Click the
Adjust for best performance
radio button.
5. Click
OK
.
Removable Media
When importing removable media from XDCAM in View as Tape mode, it will be
considerably slower than real time if the removable media is comprised of a large
number of clips. The number of clips directly affects the speed of the import. It is
recommended that you mark and import only the sections of video that you need,
rather than importing the entire duration of the source media.
XDCAM
When inserting an XDCAM disk or Panasonic P2 disk into the system, Windows may
begin an autorun session, which will pop up a windows explorer dialog by default.
To disable the autorun session:
1. Go to
Start | Run
and type in gpedit.msc.
2. Go to Administrative Templates.
3. Click
System
.
4. In the right hand pane, open
Turn off AutoPlay
.
5. Select
CD-ROM drives
in the dropdown menu.
6. Select
Enable
and click
OK
.
18 October 2010
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
73
Operation considerations
