GRAPHTEC CELITE-50, Руководство пользователя

Страница: 59 / 128

4-7
Chapter 4 Convenient Functions
6.
Pull out the roll media and create slack in the roll media that is the same amount as the length used at
the front of the main unit.
Create slack equivalent to
length being used
7.
On the "HOME" screen, touch the "LOAD MEDIA".
When Scanning at the Edge of the Roll Media
By touching the "ROLL START EDGE", the width and the
leading edge of the roll media will be scanned and the roll
media will be loaded.
When Scanning the Roll Media at the Loaded Position
By touching the "ROLL CURRENT POSITION", only the width
of the roll media will be scanned and the roll media will be
loaded.
If an error is displayed, operate the device by following the on-
screen instructions.
CAUTION
When the "ROLL START EDGE" or "ROLL CURRENT POSITION" is touched, the media and tool carriage
will start moving. Be careful to avoid contact with your body or any object.