GRAPHTEC CELITE-50, Руководство пользователя

Страница: 96 / 128

5-18
Chapter 5 Detailed Settings
7.
Touch the "SCAN".
8.
Use the " ", " ", " " and " " to move the tool to the
registration mark scan starting area and touch the (OK).
Media T
ransport Dir
ection
Registration Mark
Scan Starting Area
Registration Mark
for Correction
X
Y
Scan the registration mark and then plot a registration mark to use for comparison.
CAUTION
When the "OK" is touched, the media
and pen carriage will start moving.
Be careful to avoid contact with your
body or any object.
Distance
Adjustment Value Y
Distance Adjustment
Value X
Registration Mark
for Correction
Registration Mark
for Comparison
X
Y
Media T
ransport Dir
ection
9.
Measure by how much the registration mark for comparison is displaced from the registration mark for
correction.
Measure the distance between the center of each line.
In the case of the image on the bottom in Step 8, the correction needs to be made in the negative
direction for both X and Y so the correction values for each will be a negative value.
10.
Touch the "ADJUST X".
11.
Input the value of X measured in Step 8.
Use the " " and " " to select the setting value and confirm the
selection with the (Confirm).
12.
Similarly input "ADJUST Y".