Graco HydroShield WABH00, Инструкция - Каталог запасных частей

Страница: 59 / 142

Setup Menus
Maintenance Maintenance Maintenance Screens Screens Screens
Maintenance Maintenance Maintenance 1: 1: 1: Maintenance Maintenance Maintenance Due Due Due
Use the Maintenance Due screen to set maintenance
reminders for system components. When the cycle
counters for each item reach these set values, an
advisory is displayed on the screen.
Isolation Isolation Isolation Valve: Valve: Valve: The number of times the isolation
valve shuttle has moved.
Isolation Isolation Isolation Valve Valve Valve Seal: Seal: Seal: The number of times the seals
in the housing have been engaged.
Wash Wash
Wash Fluid:
Fluid:
Fluid: The number of times the wash fluid has
been moved through the isolation valve.
Volume: Volume:
Volume: The total volume (cc) of fluid dispensed
by the isolation fluid pump between maintenance
events. This value does not account for material that
is pushed through the system in Prime mode.
Pump: Pump:
Pump: The number of times the isolation fluid pump
has dispensed fluid.
Pump: Pump:
Pump: The number of days that have passed since
the last stall test was completed successfully. See
Pump Stall Test Procedure, page 60 .
Solenoid Solenoid Solenoid Valve: Valve: Valve: The number of times the
solenoid valves have been activated. (All of the
solenoids listed in Status screens 1 and 2. See
Status Screens, page 50 .)
Maintenance Maintenance Maintenance 2: 2: 2: Pump Pump Pump Stall Stall Stall Test Test Test
Use the Pump Stall Test screen to test the isolation
fluid pump for internal and external fluid leaks. During
the Pump Stall Test, the pump position is held for 60
seconds while the system looks for leaks.
3A8492A 59