Graco HydroShield WABH00, Инструкция - Каталог запасных частей

Страница: 37 / 142

Control Interface
Menu Menu Menu Bar Bar Bar
The menu bar appears at the top of each screen.
Date Date Date and and and Time: Time: Time: The date and time are always
displayed in one of the following formats.
• DD/MM/YY HH:MM
• MM/DD/YY HH:MM
• YY/MM/DD HH:MM
The time is always displayed as a 24-hour clock.
Set the time in the following Setup menu:
Advanced Screen 1, page 55 .
Arrows: Arrows: Arrows: The left and right arrows indicate screen
navigation.
Screen Screen
Screen Menu:
Menu:
Menu: The screen menu indicates the
currently active screen, which is highlighted. It also
indicates the associated screens that are available
by scrolling left and right. For example, Home or
Calibrate.
System System System Mode: Mode: Mode: The current system mode is displayed
at the left of the menu bar. There are five modes:
Off, Standby, Prime, Spray, and Purge.
Error Error
Error Status:
Status:
Status: If there is an active system error, one of
the following icons displays in the middle of the menu
bar: Advisory, Deviation, or Alarm.
If no icon displays, the system has no information
or no error has occurred.
Icon Icon Icon Function Function Function Description Description Description
Advisory Informational
Deviation Important, no
system shutdown
Alarm Very important,
system shutdown
Soft Soft Soft Key Key Key Icons Icons Icons
NOTICE NOTICE NOTICE
To prevent damage to the soft key buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
Blue icons indicate that a button is not
available.
Gray icons with a green outline indicate
that the button is active or selected.
Blue icons with a gray outline show that
the button is available, but not active or
selected.
Navigate Navigate Navigate the the the Screen Screen Screen
To edit the information on a screen press the Enter
Screen key .
To advance to the next screen, press the down arrow
.
Press the Exit Screen button to exit the screen
settings.
To enable a check box, navigate to the box for the
item and press the Enter button
. To clear the box,
press the Enter button again.
Use the up and down arrows to navigate
through the screen.
To reset the cycle count to 0 in the In the Maintenance
screens, press the Count Reset button for one
second.
3A8492A 37