Gossen Metrawatt GmbH
49
4.14.6 Trigger Function Selection
Example:
Select „Tran“ in trigger function selection (Trig Function).
For the above operating procedures, the corresponding SCPI commands should be:
TRIG:FUNC
TRAN
Selects transient operation (TRAN) for trigger function
4.14.7 Knob Function
Example:
Enable the knob function.
4.14.8 Key Sound
Example:
Enable the key sounds.
4.14.9 Communication Interface
Example 1:
Select RS232 interface; set the baud rate to 9600; set parity check to None; set data bit to 8; set stop bit to 2;
enable the flow control.
Example 2:
Select GPIB interface, set the address to 18.
Procedure
Description
Display
1
Press the
key to enter into the main menu.
Load Default
:
Yes *No
2
Use the
▼
key to select the menu item “Trig Function”; use the knob or the
◄
key to select the parameter “Tran”.
Press the
Enter
key to confirm.
Trig Function
:
*Tran List
3
Press the
key to exit the main menu.
0.000V 0.000A
0.000A CCH
OFF
Procedure
Description
Display
1
Press the
key to enter into the main menu.
Load Default
:
Yes *No
2
Use the
▼
key to select the menu item “Knob”; use the knob or the
◄
key to select the parameter “On”.
Press the
Enter
key to confirm.
Knob
:
On *Off
3
Press the
key to exit the main menu.
0.000V 0.000A
0.000A CCH
OFF
Procedure
Description
Display
1
Press the
key to enter into the main menu.
Load Default
:
Yes *No
2
Use the
▼
key to select the menu item “Key Sound”; use the knob or the
◄
key to select the parameter “On”.
Press the
Enter
key to confirm.
Key Sound
:
On *Off
3
Press the
key to exit the main menu.
0.000V 0.000A
0.000A CCH
OFF
Steps
Description
Display
Step 1
Press the
key to enter into the main menu.
Load Default
:
Yes *No
Step 2
Use the
▼
key to select the menu item “Interface”; use the knob or the
◄
key to select the parameter “RS232”.
Press the
Enter
key to confirm.
Interface
:
*RS232 USB GPIB
Step 3
Use the
▼
key to select the menu item “Baud Rate”; use the knob or the
◄
key to select the parameter “9600”.
press the
Enter
key to confirm.
Baud Rate
:
*9600 19200
Step 4
Use the
▼
key to select the menu item “Knob”; use the knob or the
◄
key to select the parameter “On”.
Press the
Enter
key to confirm.
Wählen Sie mit Hilfe der Taste
▼
den Menüpunkt „Parity Check“. Setzen Sie mit dem Drehgeber oder der Taste
◄
den Parameter
auf „None“. Betätigen Sie die Taste
Enter
, um die Eingabe zu bestätigen.
Parity Check
:
*None Even Odd
Step 5
Use the
▼
key to select the menu item “Data Bit”; use the knob or the
◄
key to select the parameter “8”.
Press the
Enter
key to confirm.
Data Bit
:
*8 7
Step 6
Use the
▼
key to select the menu item “Stop Bit”; use the knob or the
◄
key to select the parameter “2”.
Press the
Enter
key to confirm.
Stop Bit
:
1 *2
Step 7
Use the
▼
key to select the menu item “Flow Control”; use the knob or the
◄
key to select the parameter “On”.
Press the
Enter
key to confirm.
Flow Control
:
On *Off
Step 8
Press the
key to exit the main menu.
0.000V 0.000A
0.000A CCH
OFF
Steps
Description
Display
Step 1
Press the
key to enter into the main menu.
Load Default
:
Yes *No
Step 2
Use the
▼
key to select the menu item “Interface”; use the knob or the
►
key to select the parameter “GPIB”.
Press the
Enter
key to confirm.
Interface
:
RS232 USB *GPIB
Step 3
Use the
▼
key to select the menu item “GPIB Address”; use Entry keys or the knob together with
◄
►
keys to select the
parameter “18”. Press the
Enter
key to confirm.
GPIB-Adresse
:
18
Step 4
Press the
key to exit the main menu.
0.000V 0.000A
0.000A CCH
OFF
