Gossen Metrawatt GmbH
43
4.8.3
Starting/Stopping the List
Example 1:
Start the No.0 sequence, and stop the active sequence operation.
For the above steps, the corresponding SCPI commands should be:
LIST:RECALL
0
Recalls the number 0 sequence
LIST
ON
Starts sequence operation
LIST
OFF
Stops sequence operation
4.9
Battery Discharge Operation
Figure 1.1
Battery discharge operation diagram
The operating procedures for battery discharge operation are shown below:
1
Press the
key to turn off the load, and connect the tested battery correctly.
2
Press the
key +
key to enter into battery discharge operation screen.
3
Press the
key to enter into battery discharge parameters edit screen. Use
▲
and
▼
keys to select the parameter. Use the
Entry keys or the knob together with
◄
►
keys to input termination voltage value and discharge current value. Press the
Ente
key
to confirm.
4
Press the
key to exit the battery discharge parameters edit screen.
5
Press the
key to turn on the load, and start battery discharge operation.
6
Press the
key to turn off the load, and stop battery discharge operation.
7
Press the
key to clear the discharge time and discharge capacity of the battery.
8
Press the
key +
key to exit the battery discharge operation.
Steps
Description
Display
Step 1
Press
and
key to enter into sequence operation menu.
►
No.: 1
Memo:
Step 2
Use Entry keys or knob to set the sequence number (No.) to 0, and press the
Enter
key to confirm (recall the sequence in EEPROM
assigned by the sequence number).
►
No.: 0
Memo: Test Power
Step 3
Press the
key to exit sequence operation menu.
0.000V 0.000A
0.000A CCH
OFF
Step 4
Press the
key +
key to activate sequence operation.
0.000V 0.0000A
1.0000A
L
CCL ON
Step 5
Press the
key +
key to stop sequence operation.
0.000V 0.000A
0.000A CCH
OFF
E Load
