manualshive.com logo in svg

GLP KNV Dot, Быстрый старт и руководство по безопасности

Поделиться
Скачать
GLP KNV Dot Скачать руководство пользователя страница 18

www.glp.de

 

 

 

18 

KNV Dot and Line Quick Start and Safety Manual Rev. A 

6.

 

Features 

The KNV Dot and KNV Line expand GLP’s KNV Cube and Arc range to give even more 
flexibility in the creation of permanent and temporary dynamic lighting installations. 
The KNV Dot is a single-pixel source with full RGBW color mixing capability and a 
powerful output. It can be installed individually or joined with other KNV fixtures to give 

pixel-level flexibility in creative installations. 
The KNV Line has 5 high-powered RGBW pixels in a simple linear format. It features an 
attachment point on each side, allowing it to join seamlessly with the KNV Cube and 
KNV Arc.  
KNV Dot and Line fixtures contain the same RGBW pixels as in other fixtures in the KNV 
range, with full color mixing, dimming and shutter power as well as complete pixel 
mapping capabilities. 
The KNV Dot and Line’s rugged construction and IP54 rating means that they can also 
be used outdoors in temporary installations if precautions are taken to prevent 

immersion in water and damage from direct sunlight. Fixtures can be placed upright 
on level surfaces and suspended from suitable structures as directed in this manual. 
To simplify installation, power and 
data can be daisy-chained to KNV 

Dots, and KNV Dots can be 
physically locked together. 
The range of installation hardware 
items available from GLP allows KNV 
fixtures to be installed in an endless 

number of creative configurations. 
KNV products are not suitable for 
household use, for use in any 
location where unattended children 
have access to it, or for use in 

permanent outdoor installations. 

Control and functions 

This Quick Start and Safety Manual 
gives a very basic overview of 

control options and functions. See 
the KNV Dot and Line User Manual 
available for download from 
www.glp.de for full details of control, 

pixel layout, etc. 
 

 

 

Figure 7. Array of KNV Dot and Line fixtures 

Содержание KNV Dot


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды