GILES GBF-50, Руководство по эксплуатации и обслуживанию

Страница: 51 / 111

41
Fryer Operation
GBF-50 Fryer
4.01.7.1 Manually Operating Basket Lifts (when optionally equipped)
4.01.7 Additional Controller Features
NOTE:
▪ Lift Switch on control panel must be in the [ON] position for lifts to operate.
▪ As a safeguard against lowering product into oil that is not at cooking temperature, manual basket lift operation
is disabled while the controller is in
PREHEAT .
▪ Once a lift has been operated, it cannot be actuated again for approximately 20 seconds .
Press the [BASKET] key once
Use keypad [ 2] UP • [ 8] DOWN key to select
raise or lower .
Press [CLEAR] to Cancel the operation.
Press appropriate key to select side
[4]=Left [5]=Both [6]=Right
Selected lift(s) will operate as specified.
4.01.7.2 COOL Mode
To exit COOL press the [CLEAR] key, then press [<4] to exit
‐ OR ‐
Press [CLEAR] again to continue with COOL mode.
When exited, temperature setpoint returns to the previous active value and fryer
enters
PREHEAT until temperature is reached. A STIR OIL alarm is issued when
setpoint is reached, as described in Section 4.01.2.
+
COOL Mode is an energy ‐ saving feature for periods of inactivity. When selected it
automatically changes the oil temperature setpoint to a lower value and places fryer into an
standby state.
Press the
[COOL] key once to enter COOL mode. Temperature setpoint changes to the COOL
TEMP setting specified in User Settings, see Section 4.01.8 .
Factory default = 275°F . The setting can be edited in a range of 200°F to 350°F .