GF PORTAFLOW 330, Инструкция по эксплуатации

Страница: 22 / 56

Instrction manual Operating Procedures
21
11.
If you need to alter the fluid temperature from
that shown select either °C or °F with the
cursor and press the ENTER key.
12. Enter the new temperature value and ress the
ENTER key.
13. The new temperature should now be indicated
in both °C and °F.
14. Select Continue. then press the ENTER key.
15.
The SENSOR SEPARATION screen now
displays a summary of the entered parameters
and informs you of the type of sensor to be
used, the mode of operation and the distance
to set up between the sensors. In this example
it recommends type A-ST (A standard) sensors
operating in the ‘Reflex’ mode spaced at
32.2mm apart.
16. Take a note of the displayed parameters, then
press the ENTER key.
17. The ATTACH SENSORS screen displays, giving
instructions to attach the sensors.
The SENSOR SELECTION menu can be entered by use of the Up/Down scroll keys. This
allows the type and mode of the sensors being used to be selected. This menu will be
entered automatically if the entered pipe OD and/or temperature are not valid for the
currently selected sensors.
Do not press the ENTER key until the transducers are fitted and connected to the
instrument.
NOTICE
NOTICE