GF PORTAFLOW 330, Инструкция по эксплуатации

Страница: 19 / 56

Operating Procedures Instruction manual
18
7.1 Setting-up the Instrument
7.1.1 Using the instrument for the first time
Before you use your Portaflow 330 for the first time you should first charge the battery, then
select the display language and set-up the internal clock, as described below.
Charging the battery
1. Connect the external battery charger to the
charger socket at the bottom of the
instrument then switch on the utility supply.
2. The instrument should indicate CHARGING
and an animated battery symbol indicates that
the battery is taking on charge.
3. Leave the instrument on charge for 6.5 hours
before using it for the first time.
Selecting a language
The first time you switch on the instrument you
may be asked to select a user language.
1. Switch on the instrument by pressing the
N/OFF button.
2. If necessary, select the required language
using the UP/DOWN scroll keys then press
the ENTER key.
3. The selected language will be the default
when the instrument is next used. To change
the language again select the Change
Language option in the SETUP INSTRUMENT
screen (see below)
4. The initialisation screen will be displayed,
giving details of the instrument’s serial
number and software revision details.
5. Press the ENTER key to start the instrument.
6. This is the MAIN MENU and is the starting
7. point for all the operations described in his
chapter.
Setting the Date & Time
1. Select Setup Instrument from the MAIN
MENU. The screen shown here should be
displayed.
2. Select Set Date & Time and click ENTER.
3. A flashing cursor should appear under the
first date number. Enter the date sequence in
dd-mm-yy order then press the ENTER key.