GESTRA URB 60, Оригинальное руководство по установке и эксплуатации

Страница: 56 / 68

56 URB 60 - Installation & Operating Manual -
819699-00
Opening the limiter overview
Open the limiter overview,
see example.
Two limiters are shown as a maxi-
mum.
For each limiter, an icon appears at the bottom
of the screen:
Limiter 1
Limiter 2
Description of display:
■ ■
Limiter 1 or 2
Displays the available safety
control unit (e.g. URS 60).
■ ■
1st to 4th electrodes and sensors
Displays the available limiter electrodes
(e.g. NRG 16-60) and sensors.
If an electrode with an actual value/
limit value that can be displayed is
connected, these parameters appear
in the lower part of the window.
■ ■
For example:
■ ◆
2. SCL (2nd electrode) *
■ ◆
4. STL (4th sensor) *
* Abbreviations for safety electrodes:
SLLL = safety low-level limiter
STL = safety temperature limiter
SHLL = safety high-level limiter
SCL = safety conductivity limiter
■ ■
Setup (for SIL2 LRG 1x-6x electrodes only)
- Setting safety parameters
For a conductivity electrode, a setup button is
also shown. You can use this to set the safety
parameters, see page 57.