GESTRA URB 60, Оригинальное руководство по установке и эксплуатации

Страница: 34 / 68

34 URB 60 - Installation & Operating Manual -
819699-00
Viewing CAN bus nodes
View CAN bus
nodes.
After the system is started, all CAN bus nodes
of the system are entered here. To achieve this,
the communication between CAN bus nodes is
constantly monitored after the system has been
started for the first time.
The CAN bus is re-analysed after a restart. New
nodes are found and entered.
The parameters of all CAN bus nodes
are only collected and continuously
updated following complete analysis.
You can see this from the progress
number (127/127) at the top right of
the display.
Description of the list:
■ ■
No.
Consecutive number.
■ ■
Node ID
The node ID of the CAN bus node.
■ ■
ID
The ID (channel) of the limiter electrode. No
other CAN bus nodes have an ID.
■ ■
Type
Designation of control unit/electrode (e.g. NRG
1x-60).
■ ■
Version
Unit version number.
■ ■
Group
The group containing the CAN bus node.
Reimporting the device list
If a CAN bus node is not on the list, check the
node.
You can then reimport the device list by tapping
the “
Type ” input field or via the “ Device settings ”
menu, see page 37.
This deletes all devices from the list and then lists
them afresh.