GESTRA URB 60, Оригинальное руководство по установке и эксплуатации

Страница: 31 / 68

31 URB 60 - Installation & Operating Manual -
819699-00
Alarms and error messages
Status and colour of warning triangle:
■ ■
Yellow, flashing
Active unacknowledged alarms are present.
■ ■
Yellow, on continuously
Active acknowledged alarms are present.
■ ■
Grey
No alarms are active.
Opening the alarm and error list
Opens the list of active alarms.
Options:
Opens the alarm history,
see page 32.
Alarm Info, opens a list of the
descriptions and abbreviations
used:
This button is displayed
dynamically if a limiter (L1.. / L2..)
alarm message is selected, and
pressing the button causes the
screen to jump to the limiter page.
Acknowledges alarms. Expired
“alarms” are deleted from the
list.
* For a description of fault codes for
controllers and limiters, see page 59.
For electrodes in the respective
Installation & Operating Manual.
Description of the alarm and error list
Alarms (Max/Min limit values, limiter triggered)
and error messages (offline, hardware errors)
are entered in the columns (Pending (= Come),
Expired (= Gone)) with a timestamp.
The most recent alarm is always shown at the top
of the list. To select an alarm message, select the
line in question.
Description of display:
■ ■
Come (= Pending)
Time at which the event occurred.
■ ■
Gone (= Expired)
Time at which the event disappeared
but was not acknowledged.
■ ■
Description and abbreviations:
G1...4 Groups 1 to 4
L1..2 Limiter 1 or 2
C1..4 Limiter channel
NRG / LRG /
NRR / LRR ...
Type of equipment
NRR 2 = Level controller NRR 2-61
E001...E027
Fault codes based on specific
device or system *
MAX alarm,
offline, etc.
Error/malfunction/status
Example: G1 – LRR Max Alarm