GESTRA URB 60, Оригинальное руководство по установке и эксплуатации

Страница: 29 / 68

29 URB 60 - Installation & Operating Manual -
819699-00
Home screen
The home screen provides an overview of the
status of available limiters and controllers. Bar
charts display current readings and change colour
depending on their status. This enables you to
rapidly assess the state of the system.
Limiter icons above the bar charts indicate the
status of the connected electrodes.
Opening the parameter screens:
Use the following buttons to open the parameter
screens:
Limiters,
see page 56
Level controllers,
see page 41
Conductivity controllers,
see page 48
Opening alarm and system screens:
Alarms and error messages,
see page 31
System settings,
see page 33
Opening groups:
Up to four groups may be available, depending
on the system. You can navigate between the
individual groups.
Group 1
e.g. controlling and configuring limiters
and controllers in pressurised steam
and hot-water plants.
Group 2
Group 3
Group 4
Groups 2 - 4
Controlling and configuring controllers
and plant, e.g. feedwater and conden-
sate plants, etc.
Example
If the level controller is a 3-compo-
nent (3C) controller, the level shown
on the home screen may differ from
the level displayed for the electrode,
as compensation is taking effect in
the controller.