manualshive.com logo in svg

Gerber Dimension 200, Руководство пользователя

Поделиться
Скачать
Gerber Dimension 200 Скачать руководство пользователя страница 79

System Preparation and Use    79

12.

 

Press START/STOP three times to begin table milling. This
displays the header and tool messages and begins routing.

GRID ENGRAVING WITH T-VAC OPTION

The grid engraving program is supplied with ART Path in the

VACGRID.RTP

 file. The 

VACGRIDM.RTP

 file contains a similar grid

for use with a metric system.

VACGRID.RTP3

To engrave the grid

1.

 

In ART Path, choose Open from the File menu.

2.

 

Highlight Router Files under List Files of Type to open

VACGRID.RTP

 (or 

VACGRIDM.RTP

). Click on OK.

3.

 

In the Setup menu, select Start/End position.

4.

 

Set the Start/End position to start and end the machine at the
lower left.

5.

 

Click on OK.

6.

 

Install the .020 engraving bit supplied in the tool kit.

7.

 

On the ARC station, press Z INIT once to unlock the Z axis.

Содержание Dimension 200
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды