Gerber Dimension 200, Руководство пользователя

Страница: 47 / 111

Operating Principles 47
Stop Ready
In STOP READY, the GRAPHIX ADVANTAGE sends data to the
ARC station. The system beeps when data is received and
J, j is
displayed in the lower right corner of the message display panel.
„
Press the START/STOP key to begin the job.
„
The carriage can be slewed to establish a start position for the
next job.
The job start position can be changed in the STOP READY mode.
It can also be changed when one of the following occurs:
„
SET HOME is selected from the menu
„
the job completes
„
the operator presses RESET to abort the job and clear it from
the ARC station
„
the ARC station receives a terminate command from the
GRAPHIX ADVANTAGE Plot Spooler.
Stop Job
If you press the START/STOP key while in the START JOB mode,
the machine enters pause mode and results in the following:
„
the
STOP JOB
message appears
„
no incoming data processes
„
the job stops at the next logical break point
„
the tool raises
„
the router motor turns off
„
an asterisk appears in the upper right corner of the message
display.
When the router is in pause mode, you can slew the router
carriage for tool changes or other tasks. Press START/STOP to
return the router tool to the position in the job where the operator
paused the system. The job can be resumed without position or
data loss.