GEOSATpro DVR1100c, Руководство пользователя и инструкция по эксплуатации

Страница: 39 / 60

www.geosatpro.com Toll Free 888-483-4673
37
Skew Angle:
___________
Install the 4 Degree Rotating
LNBF Clamp. The Skew Angle
number scale (LNBF Rotation)
must be visible while standing in
front of the dish looking into the
reflector. Attach the LNBF clamp
to the LNBF arm. LNBF #1 is on
the right side of the Clamp, LNBF
#2 is on the left.
Example: Negative -40 is
set while standing in front
of the dish looking into or
towards the reflector.
Rotate the Twin LNBF clamp to the
Skew Angle (LNBF Rotation) specified
in the aiming coordinates. Standing in
front of the dish looking towards the
reflector, a Positive (+) Skew Rotation
is set counter clockwise meaning that
the left LNBF is rotated lower than the
Each mark on the clamp measures 5°. If
the aiming coordinates specify a skew
angle of +25, set the pointer to Positive 25°
(counter clockwise). Tighten the locking
nut securely to prevent any movement.
This setting should be adjusted, locked
and not require any further adjustment.
If the Mast or mounting post is not
PERFECTLY plumb, the skew angle
will not be correct and the dish will be
difficult to aim!
Skew Angle is set with the Skew Scale visible while
standing in front of the dish facing the dish. The
Skew Scale faces the sky not the dish.
(LNBF Rotation)
right LNBF. Negative Skew (-) is a clockwise rotation and the right
LNBF is rotated to be lower than the left LNBF.
Stamped printing on the clamp
bracket faces out towards the sky,
not inside facing the reflector.