GEOSATpro DVR1100c, Руководство пользователя и инструкция по эксплуатации

Страница: 42 / 60

B. Gohl
© Satelliteav.com
40
Place the assembled dish onto the post. Set
the Dish Elevation to the angle provided
When setting the dish elevation angle it
is important to note that the face of the
dish will be aimed lower than the actual
elevation angle to the satellite. The scale
on the elevation bracket is calibrated
for accurate aiming if the post has been
installed perfectly plumb (leveled on all
sides). The dish elevation angle cannot
be set using an angle finder on the LNBF
arm or on the face of the dish.
on the cover of this manual.
The pointer for the elevation
indicator is a white line that is
visible through the elevation
scale and is located near the
edge of the elevation fastening nut.
Semi-tighten the elevation fastening nuts to hold the dish in position.
Do not tighten the fasteners for final setting at this time. Additional
adjustment will be needed to locate and peak the satellite signal.
Do not grip the edges of the reflector to adjust the dish. Always
hold the dish by the elevation bracket during elevation or azimuth
(side-to-side) adjustments. Applying pressure to the reflector
will affect the accuracy of the satellite signal reflection from the
dish into the LNBF.
Dish Aiming
Level and Secure Post