GEOSATpro DVR1100c, Руководство пользователя и инструкция по эксплуатации

Страница: 53 / 60

www.geosatpro.com Toll Free 888-483-4673
51
Important Notice: Adjustments to the twin LNBF clamp
or the LNBFs rotation or placement can negatively
affect your installation. Please consider stopping the
fine tuning process at this time and lock down the dish
elevation and azimuth adjustments if the signal quality
is 50% or better on the weakest channel!
LNBF #1 or #2 can be slightly rotated
within the twin LNBF clamp +/- 5° to
optimize the satellite quality readings.
Slightly loosen the two Phillips head
screws that secure the twin LNBF clamp. Place the receiver on the
weakest AMC4 channel and slowly rotate LNBF #1 left or right. If
no improvement in quality, re-center the LNBF. Place the receiver
on the weakest Galaxy19 channel and slowly rotate LNBF #2 left or
right. If no improvement in quality, re-center the LNBF.
LNBF #1 or #2 can be slightly
positioned in the twin LNBF clamp
towards or away from the reflector
to optimize the satellite quality
readings. Place the receiver on the weakest AMC4 channel and
slowly slide LNBF #1 in toward the reflector or out away from
the reflector. If no improvement, return the LNBF to the 20mm
(3/4”) forward position. Place the receiver on the weakest Galaxy19
channel and slowly slide LNBF #2 in or out. If there is no
improvement, return the LNBF to the 20mm (3/4”) offset. Tighten
the two Phillips head screws to secure the dual LNBF clamp.
LNBF Adjustment - (optional)
LNBF Rotation Fine Tuning
LNBF Position Adjustment