GEOSATpro DVR1100c, Руководство пользователя и инструкция по эксплуатации

Страница: 20 / 60

B. Gohl
© Satelliteav.com
18
II-2. Motor Setup
Highlight Motor Setup. Press OK. Enter Password
(default 0000)
1.
Motor Type
USALS is preferred way to install
- Press OK to display DiSEqC 1.2 / USALS
- Select the control method. Press OK
- Press GREEN button and enter the
install location Longitude and Latitude.
2. Satellite
- Press OK to display list of satellites
- Select the proper satellite. Press OK
3. Switch & LNBF
- Press OK to display current setup
- Change settings as needed. Press OK
4. TP Frequency
- Press OK to display list of transponders
- Select an active transponder. Press OK
5. Motor Movement
use with DiSEqC 1.2 control
- Press Navigate LEFT/RIGHT arrow to
move the dish East or West
6. Motor Control
- Press Navigate LEFT/RIGHT arrow to:
Store Sat Position: Stores current position
Goto Sat Position: Moves to stored position
Goto 0: Moves to motor 0 position
Reset Position: Resets motor stored settings
- Press OK to execute command
7. Satellite Position
- Modify if satellite position is incorrect.
8. Search Options
- Press OK to display list of Search Types
- Select the proper search type. Press OK
9. Search
- If Signal Quality meter is displaying
Quality, Press OK to scan for channels.
1) Press RED button to edit a transponder.
2) Press Green button to add a transponder.
3) Press YELLOW to delete a transponder.
4) Press BLUE to add a channel with PIDs
5) Press EXIT when completed. Press OK to
save changes or highlight CANCEL and
then press OK.
II-2.b Transponder Edit