GEOSATpro DVR1100c, Руководство пользователя и инструкция по эксплуатации

Страница: 34 / 60

B. Gohl
© Satelliteav.com
32
Using the aiming coordinates included with this system or found
at http://www.GeoSatFinder.com along with a compass and the
Site Check Angle Finder located on the last page of this manual,
locate a suitable dish mounting position. While facing south, hold
the compass level in the palm of your hand. With the red needle
pointed exactly at North, reference the compass reading. Are there
any obvious obstructions? If the line of sight appears clear, continue
to the check the elevation angle. Sight along the top edge of the
elevation angle finder with the weighted string registering the correct
elevation angle. Is the line of sight clear with no branches, limbs or
tall buildings?
The Elevation Angle Finder is only used for the site
check and cannot be used to measure the elevation angle of the dish.
The elevation scale on the back of the dish is used for setting the
correct elevation angle.
Compass
Elevation Angle Finder
Reception of Two Satellites
One last site survey item is that the satellite dish receives channels
from two satellites located 4 degrees apart. The aiming coordinates
provided are for a point between AMC4 and Galaxy19 (formerly
Galaxy 25). This spacing is very close and only during rare
installations would the line of sight be so narrow that only one
satellite could be received.