GEOSATpro DVR1100c, Руководство пользователя и инструкция по эксплуатации

Страница: 44 / 60

B. Gohl
© Satelliteav.com
42
The easiest way to aim the satellite dish is to temporarily place the
satellite receiver connected to a small television at the dish antenna
mounting location.
CAUTION: DO NOT ATTEMPT TO OPERATE
ELECTRONIC DEVICES IN AN UNSAFE
LOCATION OR IN VIOLATION OF SAFEGUARDS
PROVIDED IN THIS MANUAL OR ANY OTHER
EQUIPMENT MANUAL PROVIDED WITH THIS
GLORYSTAR SATELLITE SYSTEM.
Remove the satellite receiver and remote control from the packaging.
Inspect the unit before operation. If any equipment is damaged or
if you have any questions, please immediately contact Glorystar at
866-597-0728.
Install the two included AAA batteries into the remote control battery
compartment..
Plug the satellite receiver’s AC power plug into the same power
strip. Power ON the Master Power Switch on back of the receiver.
The receiver will power on and the front panel will display “ boot ”.
The TV will display the Language Selection Screen.
Connect the satellite receiver to the TV.
The most basic connection is to locate the
included 6’ coax jumper with the plastic
moulded ends and connect from the TV
/VCR port on the satellite receiver to the
Antenna connection on the TV. Plug the
television power plug into a surge protected
power strip. Turn the TV power on and set
the TV to channel 3. The TV is now set-up
to view the satellite receiver.
Connect Receiver to a TV