Geolux GLX-RSS-2-300 WL Скачать руководство пользователя страница 27

Страница: 27 / 71

GLX-RSS-2-300 WL User Manual

GLX-RSS-2-300 WL Non-Contact Flow Meter

Data Interface

Geolux RSS-2-300 WL flow meter offers multiple data interfaces, in order to make the integration of the

device with existing SCADA/telemetry systems easy.

6.1. Serial RS-232 Interface

Serial RS-232 interface is used for direct connection of a single surface velocity radar unit with the

computer. The serial interface is used both for retrieving live flow measurements and for configuration

of the surface velocity radar device. Geolux provides a PC application for unit configuration and flow

monitoring free of charge.

Default communication parameters are:

Bitrate: 9600 bps

Data bits:

Stop bits:

Parity:

None

A NMEA-like communication protocol is used to deliver flow measurements over RS-232 interface.

Detailed description of the protocol is given in chapter 7 of this user manual.

6.2. Serial RS-485 Interface

Serial RS-485 interface is used for connecting multiple flow meters to a single data logger. RS-485

interface uses a different protocol then the protocol used over RS-232 interface, in order to allow

multiple surface velocity radars connected on a single RS-485 bus. The main difference from the

protocol used over RS-232 interface is that the flow measurements are not reported automatically,

but are instead reported only after being requested by the master device (data logger unit). Detailed

description of the protocol is given in chapter 7 of this user manual.

Default communication parameters are:

Bitrate:

9600 bps

Data bits:

Stop bits:

Parity:

None

Содержание GLX-RSS-2-300 WL







































































Результаты поиска

Содержание GLX-RSS-2-300 WL

Отзывы:

Похожие инструкции для GLX-RSS-2-300 WL

Бренды по названию

Популярные бренды

Geolux GLX-RSS-2-300 WL, Руководство пользователя

Результаты поиска

Содержание GLX-RSS-2-300 WL

Отзывы:

Похожие инструкции для GLX-RSS-2-300 WL

Бренды по названию

Популярные бренды