Genie GR-26J, Руководство по обслуживанию

Страница: 64 / 119

Section 4 • Repair Procedures
4 - 18 GR-20J • GR-26J Part No. 227656
September 2016
Illustration 1
a wear pad 10 mm
b mast section (mast 1 shown)
2 Install six 12 mm wear pads, and the
corresponding shims removed in the mast
disassembly process, onto the bottom of mast
sections 1, 2, 3 and 4.
3 Using Illustration 1 as a guide, install two 10
mm wear pads, and the corresponding shims
removed in the mast disassembly process, onto
the top of mast sections 1, 2 and 3.
4 Install six 12 mm wear pads, and the
corresponding shims removed in the mast
disassembly process, onto the top of mast
sections 1, 2 and 3.
5 Using Illustration 2 as a guide, apply grease
onto the inner faces of the mast sections 1, 2
and 3.
Grease Specification
RETINAX HDX2 grease, NLGI (lithium based)
or equivalent
MAST COMPONENTS
How to Assemble the Mast,
GR-26J
Bodily injury hazard. This
procedure requires specific repair
skills, lifting equipment and a
suitable workshop. Attempting this
procedure without these skills and
tools could result in death or
serious injury and significant
component damage. Dealer
service is strongly recommended.
1 Using Illustration 1 as a guide, install two 10
mm wear pads, and the corresponding shims
removed in the mast disassembly process, onto
the bottom of mast sections 1, 2, 3 and 4.
Illustration 2
a grease
b mast section (mast 1 shown)
P
a
b
TOP
BOTTOM
a
a
a
b
b